RIB ACG7072 220V Warning Flasher Light for Gate Automation

An addressable control output module with a single output, fitted on the detection loop to provide either one alarm circuit or a Form C relay so that external equipment can be operated on a command from the panel. The usual applications are releasing door holders and shutting down air handling units when a fire is confirmed, along with lift homing and plant interlocks. The module can be configured to supervise the wiring to the external load or the voltage of its own supply, raising a fault if that voltage falls below threshold. That supervision is what prevents a failed output from being discovered only at the moment of a fire, which is the single most common weakness in interfaces installed without monitoring. The unit carries built-in short-circuit isolators and a tri-colour status LED visible in two planes, and mounts either on DIN rail inside a distribution board or in a surface box. Visible address selector switches and plug-in connectors make commissioning and later replacement straightforward. The mains-rated version with an output relay is bi-stable, latching on and off on panel command. KIC supplies, installs and maintains it as part of the fire alarm systems we deliver across Egypt.

An addressable notification device combining a sounder with a red visual beacon in a single wall-mounted housing, supplied here with a red body and white skirt in the non-isolated version. The visual signal is not a luxury. In factories, production workshops and generator rooms the ambient noise level is high enough that relying on sound alone is not dependable, and the same applies in areas used by people with hearing impairment and in spaces where ear protection is worn as a matter of routine. In those locations a combined sounder and beacon is what makes the alarm reliably perceptible to everyone present rather than only to some. The unit runs on the same loop-powered platform as the sounder-only model, with thirty two tone sets, three volume levels and support for up to one hundred and fifty nine addresses. The range follows a consistent model scheme, so an isolated version, a beacon-only version and different colour combinations are all available on the same mounting base and with the same wiring. KIC supplies, installs and maintains it as part of the fire alarm systems we deliver across Egypt.

ZKTeco TBM01 Parking Ticket & Entry Dispenser is a ticket & entry dispenser identified by model TBM01. ZKTeco TBM01 Parking Ticket & Entry Dispenser. It is intended for professional installations where model compatibility and the listed technical characteristics must be checked before purchase.

The ZKTeco iFace 502 is a time attendance and access control terminal that combines face, fingerprint, card, and password verification, and can require more than one method together to raise the security level on sensitive doors. KIC supplies, installs and maintains it as part of the low-current systems we deliver across Egypt. It has a 4.3-inch colour touch screen and a dual camera working in infrared and visible light, which allows facial recognition even in weak lighting inside corridors and entrances. Capacity covers 500 face templates, 2,000 fingerprint templates, and 10,000 cards, with 100,000 attendance records stored in the device, enough for medium and large companies. Data moves over a TCP/IP network or a USB host port, with wireless options over Wi-Fi or GPRS, and the terminal connects to an electric lock, a door sensor, and an exit button to manage a single door. We start with a site survey and select the lock and the correct power supply, then handle installation, permission setup, and integration with the attendance software, with the official warranty and technical support after handover.